Origin

China

Continuous Extrusion Process Principle
Continuous extrusion, MFCCE series, adopts advanced technology in the world, continuously feeds the raw material like rod of certain specification into revolving squeeze roll grooved. The rod is to be rubbed and extruded in the holddown groove, generating sufficient temperature by enormous force of friction and extrusion and getting state of recrystallization, then to be extruded and formed in one piece through cavity and the purpose-made die, which could promptly make various copper or aluminum flat wire with high quality.

Extrusion characteristics:
Comparing with the traditional drawing process, continuous extrusion technology has advantages as follows:
1. Surface shine, free of bur and warped-skin, and precise physical dimension.
2. Excellent in electrical conductivity.
3. Uniform product performance and consistent, without annealing operation.
4. Products could be as ideal as state of soft and state of semi-solid, which could be supplied as random length.
5. Small floor space, low energy consumption and high material utilization, free of process residues such as remainder, side-cut.

Product Use
The equipment could produce various solid sections such as copper flat strip, copper bar & busbar, copper rod, commutator bar; Aluminum flat strip, aluminum tube, aluminum perforated flat tube. The products could be extensively used in transformer, motor, high and low voltage switch gear, power car, rail transportation and condenser used in cars, refrigerator, air conditioner.

Now we have the model as below;
1. MFCCE300, MFCCE350, MFCCE400, MFCCE500, MFCCE630

The parameter of the machine as belwo table;

model	MFCCE300
Wheel Diameter ( mm )	300
Feedstock Material	Copper or cooper alloy
Feedstock Diameter ( mm )	8.0/12.5
Max. Product Width ( mm )	32
Product Section Area  (mm 2 )	5 -60/ 10 - 150
*Output Rate(  Kg/h)	400
Scrap Rate( % )	1 - 3
Main Motor Power( KW )	90
System Power ( KW )	115
Machine Weight  (T )	8.5
Use Space  (L×W×H )	25m×6.5m×3m

model	MFCCE350
Wheel Diameter( ( mm )	350
Feedstock Material	Copper or cooper alloy
Feedstock Diameter  (mm )	12.5 or 16
Max.Product Width ( mm )	80
Product Section Area  (mm 2 )	10 - 150 / 20 -800
*Output Rate ( Kg/h )	780
Scrap Rate ( % )	1 - 3
Main Motor Power(  KW )	160
System Power  (KW )	180
Machine Weight ( T )	16
Use Space  (L×W×H )	25m×6.5m×3m

Model	MFCCE400(CU)
Wheel Diameter  (mm )	400
Feedstock Material	Copper or cooper alloy
Feedstock Diameter  (mm )	20
Max.Product Width (mm )	170 for bar/ Φ 80 for rod
Product Section Area (mm 2 )	100 - 2400 for bar
*Output Rate (Kg/h )	1200
Scrap Rate (% )	1 -3
Main Motor Power  (KW )	250
System Power ( KW )	280
Machine Weight  (T )	18
Use Space ( L×W×H )	30m×10m×3m

    

Model	MFCCE500(CU)
Wheel Diameter ( mm )	500
Feedstock Material	Copper or copper alloy
Feedstock Diameter ( mm )	25±0.3
Max.Product Width  (mm )	260
Product Section Area ( mm 2 )	400 -3800
*Output Rate K(g/h )	2000
Scrap Rate (% )	5- 8
Main Motor Power  (KW )	450
System Power (KW )	480

       

Model	MFCCE630(CU)
Wheel Diameter  (mm )	630
Feedstock Material	Copper
Feedstock Diameter  (mm )	30±0.1
Max.Product Width  (mm )	320
Product Section Area ( mm 2 )	400 - 7000
*Output Rate  (Kg/h )	2500
Scrap Rate  (% )	5 - 8
Main Motor Power  (KW )	600
System Power  (KW )	650